Connect with us

Hi, what are you looking for?

Fiscal OpulenceFiscal Opulence

Investing

Aston Bay and American West Metals Announce Fourth Diamond Drill Hole Hits Thick Interval of Visual Copper Sulfides at the Storm Copper Project, Canada

Outstanding 100% drilling success rate continues with the sediment-hosted copper system confirmed in an untested area of the Storm ProjectST23-04 has intersected a thick 18.5m zone of visual copper sulfide (chalcocite and chalcopyrite) between 339m and 357.5m downhole, which correlates with the prospective sediment hosted copper horizon intersected in all diamond drill holes this seasonST23-04 extends the apparent strike of the prospective copper horizon a further 2km to the west of ST23-03The drill hole was targeting a large gravity anomaly located south of the Southern Graben Fault, as well as the fault itself, validating the effectiveness of gravity in identifying copper sulfide mineralizationAn untested 880m x 470m Fixed Loop Electromagnetic (FLEM) conductor is located immediately south of ST23-04 indicating potential for further strong copper mineralization in the areaSuccessful drill results demonstrate further evidence of a belt-scale copper systemDrilling continues at the Storm Project with assay results pending and expected within the next two weeks

Aston Bay Holdings Ltd. (TSXV:BAY)(OTCQB:ATBHF) (‘Aston Bay’ or the ‘Company’) reports a significant new visual copper sulfide mineralization intercept from the fourth diamond drill hole at the Storm Copper Project (‘Storm’ or the ‘Project’) on Somerset Island, Nunavut, Canada. The program, still underway, is being conducted by American West Metals Limited (‘American West’), who are the project operator since entering an option agreement with Aston Bay in March 2021

‘This is a phenomenal success rate for testing blind targets that once again points to the immense potential for new discoveries at Storm’ stated Thomas Ullrich, CEO of Aston Bay. ‘The evidence mounts for a regional-scale copper system as predicted by our geological model. We are hitting copper in the same stratigraphic horizon in every widely spaced drill hole.

‘The ground gravity geophysical survey conducted by Scott Smith’s team at Initial Exploration this spring has proven its mettle as a robust and effective method for delineating sulfide mineralization in the subsurface at Storm. A critical upshot of this is that the new gravity data indicates that the large gravity anomalies from the historic surveys, previously thought to be too deep to be of interest, are potentially well within reach. We are pleased that American West is advancing the development potential of the high-grade, near-surface copper mineralization at Storm, and extremely excited for the advances made in the game-changing discoveries of the sediment hosted copper mineralization we predicted lurked in the subsurface.’

Figure 1: Breccia chalcocite (dark grey) and pyrite (yellow, brassy) in drill hole ST23-04 from approximately 349.5m downhole.

Figure 2: Plan view of the Storm area showing the gravity data interpretation, known copper deposit footprints (yellow), major faults, and diamond drill hole locations as discussed in this report.

DIAMOND DRILLING SUCCESS SUPPORTS LARGE-SCALE COPPER SYSTEM

Diamond drill hole ST23-04 has been completed in an untested area of the Storm Project and over 2km west of the recent Thunder zone discovery (August 7, 2023 Aston Bay news release).

The drill hole is the fourth hole to be completed in the current diamond drill program and was designed to test a strong gravity anomaly and to also intersect one of the main interpreted structures in the area, the Southern Graben Fault. Both targets were successfully tested and provide further evidence of a regional scale copper sulfide system within the Storm Project area.

ST23-04 intersected two zones of visual copper mineralization. The first, a wide sulfide-bearing fault zone, is interpreted to be the Southern Graben Fault. Though only minor copper is present within the fault zone, the results confirm the presence of copper mineralization and fluid movement within this regionally important and laterally extensive structure. Significantly, the drill hole intersected the fault zone over 700m along strike from the near-surface high-grade copper mineralization at the 3500N Zone (where intersections include 35.4m (core length) @ 1.73% Cu in ST99-43). This highlights the structure as an important plumbing system for copper mineralization and points to the potential relationship between the lower sediment-hosted style and upper, near-surface copper mineralization.

The second zone of visual sulfide copper mineralization intersected within ST23-04 is an 18.5m thick zone containing chalcopyrite and chalcocite which is interpreted to correlate with the same distinctive sediment-hosted mineralized horizon as encountered within diamond drill holes ST22-10, ST23-01, ST23-02 and ST23-03 (Figures 2 & 3).

Significantly, drill hole ST23-04 is located immediately north of a large, untested 880m x 470m FLEM anomaly that was defined during the 2022 field season (Figure 3). Similar conductive anomalies elsewhere at Storm have been confirmed by drilling to contain sulfide mineralization.

The repeated intersections of copper sulfide within this predictable stratigraphic horizon, and ongoing success of the gravity data as a reliable targeting tool, has enormous implications for the potential for further discoveries within the Storm area.

Figure 3: Total bouguer gravity image of the Storm area, fault architecture, drill hole and deep FLEM conductor locations overlaying aerial photography.

Hole ID

Prospect

Easting

Northing

Depth (m)

Azimuth

Inclination

ST23-01

4100N

464805

8174335

416

180

-75

ST23-02

EXPL.

464255

8174741

602

180

-70

ST23-03

EXPL.

465267

8172805

396

320

-65

ST23-04

EXPL.

463278

8173699

476

205

-60

Table 1: 2023 program drill hole details.

DRILL HOLE ST23-04 DETAILS

Diamond drill hole ST23-04 was drilled to a downhole depth of 476m and has intersected a large copper-enriched breccia/fault zone and a thick interval of visual sediment hosted copper sulfide mineralization. The drill hole was designed to test a gravity anomaly south of the Southern Graben Fault, as well as test the large fault system itself (Figures 2 & 3).

The upper zone of pyrite and copper mineralization is hosted within a 48m thick, calcite-rich fault zone that is interpreted to be the Southern Graben Fault (Figure 7). The fault zone is comprised of a matrix-supported clast breccia with the matrix locally replaced with calcite cement and locally milled and silty dolomudstone (Figure 4). The fault zone contained a large, ice-filled cavity and local occurrences of pyrite cement with anomalous copper (confirmed with portable XRF).

Breccia and fracture-fill-related copper is the likely source of copper anomalism within the fault zone. The presence of copper within this major structure is highly significant and confirms the ability of the structure to act as a source of plumbing for copper-rich fluids. This supports the potential for further high-grade copper mineralization similar to the 2750N, 2200N, 3500N and Thunder Zones along this extensive regional structure.

Figure 4: Silt and calcite (darker grey and white respectively) fracture fill within the Southern Graben Fault Zone from drill hole ST23-04 (approximately 241.95m downhole). The fracture matrix is anomalous in copper and likely contains copper oxides after chalcocite (copper sulfide).

The lower zone of mineralization was intersected at 339m downhole and is interpreted to correlate with the sediment-hosted copper mineralization intersected in drill holes ST22-10, ST23-01, ST23-02 and ST23-03 (Figure 7).

The broad mineralized interval consists mostly of chalcopyrite blebs, veinlets, and crackle breccia (Figure 5), with chalcocite present in the lower part of the sequence (Figure 1 & 6). Like previous drill holes, the copper sulfides are hosted within a sequence of organic-rich dolostones. This association confirms the extensive and predictable nature of this prospective stratigraphic horizon.

Figure 5: Blebby chalcopyrite (yellow brassy) and organic rich breccia in drill hole ST23-04 from approximately 340.8m downhole.

The strong presence of chalcopyrite in the lower copper intersection of ST23-04 suggests that the drill hole has potentially intersected the edge of the copper sulfide system: the mineralization at Storm shows a distinct zonation with a large copper-rich core (chalcocite, bornite and covellite) that gives way laterally and vertically to thinner peripheral zones of copper-iron (chalcopyrite, dominant in this intersection), iron (pyrite), zinc (sphalerite) and minor lead (galena). This spatial association of peripheral-style chalcopyrite mineralization is supported by the location of the intersection at the margin of the targeted gravity anomaly.

Density measurements (specific gravity) conducted on the drill core have shown the sulfide-mineralized intervals to be the only plausible source for the modeled gravity anomalies. The recently completed high-resolution ground gravity surveys are clearly effective at identifying hidden sulfide mineralization within this stratigraphic setting. This provides a highly effective targeting tool and suggests that all of the large gravity anomalies previously identified in the 2017 airborne gravity survey are prospective copper targets.

Furthermore, the three-dimensional modeling of the new ground gravity data indicates that the extensive historic airborne gravity anomalies, which previously modeled at a depth exceeding 1km, are likely much shallower at approximately 300m depth, well within reach of the diamond drill. As a result, the large fault-bounded gravity anomalies to the east and southeast of Storm are now high-priority targets for the 2024 geophysical and drilling programs.

Figure 6: Breccia and veinlets of chalcocite (dark grey) in drill hole ST23-04 from approximately 355.6m downhole.

Hole ID

From (m)

To (m)

Min

Description

ST23-04

0

168.5

Cape Storm Formation

168.5

200

py

Allen Bay Formation – large zones of bleaching assoc. with fractures/breccia. Fine grained py/cc breccia at 178m

200

248

py, cu-ox

Southern Graben Fault – Large, continuous clast breccia with calcite and local py/cu oxide cement

248

339

py, cc

Organic rich dolofloatstone/wackestone. 20cm wide chalcocite breccia at 306m (10%)

339

357.5

cp, cc

Organic rich dolowackestone with veinlets/crackle breccia and blebs of cp, with cc present in the lower portion of the interval (0.5-2%)

357.5

359

Rubble

359

380

Altered dolomudstone/floatstone

380

476

Massive floatstone with local alteration and vuggy/chert nodules

Table 2: Summary geological log for drill hole ST23-04. Mineralization key: cc = chalcocite, cp = chalcopyrite, br = bornite, py = pyrite, Cu = native copper, ct = cuprite, ml = malachite, sph = sphalerite, ga = galena. (5%) = visual estimation of sulfide content.

Visual estimates of mineral abundance should never be considered a proxy or substitute for laboratory analyses where concentrations or grades are the factor of principal economic interest. Laboratory assays are required to determine the presence and grade of any contained mineralization within the reported visual intersections of copper sulfides. Portable XRF is used as an aid in the determination of mineral type and abundance during the geological logging process.

Figure 7: N – S geological section through drill hole ST23-04.

PLANNED PROGRAM

The drilling is continuing to test key geophysical and geological copper targets in the Storm area.Laboratory assays for the RC and diamond drilling are pending and are expected within the coming weeks.The ore sorting, beneficiation and process optimization continues on a range of ore types.An environmental baseline survey is underway.

About the Storm Copper and Seal Zinc-Silver Projects, Nunavut

The Nunavut property consists of 173 contiguous mining claims covering an area of approximately 219,257 hectares on Somerset Island, Nunavut, Canada. The Storm Project comprises both the Storm Copper Project, a high-grade sediment-hosted copper discovery (intersections including 110m* @ 2.45% Cu from surface and 56.3m* @ 3.07% Cu from 12.2m) as well as the Seal Zinc Deposit (intersections including 14.4m* @ 10.58% Zn, 28.7g/t Ag from 51.8m and 22.3m* @ 23% Zn, 5.1g/t Ag from 101.5m). Additionally, there are numerous underexplored and undrilled targets within the 120-kilometre strike length of the mineralized trend, including the Tornado copper prospect where 10 grab samples yielded >1% Cu up to 32% Cu in gossans.

Storm Discovery and Historical Work

High-grade copper mineralization was discovered at Storm in the mid-1990s by Cominco geologists conducting regional zinc exploration around their then-producing Polaris lead-zinc mine. A massive chalcocite boulder found in a tributary of the Aston River in 1996 was traced to impressive surface exposures of broken chalcocite mineralization for hundreds of metres of surface strike length at what became named the 2750N, 2200N, and 3500N Zones. Subsequent seasons of prospecting, geophysics and over 9,000 m of drilling into the early 2000s confirmed a significant amount of copper mineralization below the surface exposures as well as making the blind discovery of the 4100N Zone, a large area of copper mineralization with no surface exposure.

Following the merger of Cominco with Teck in 2001 and the closure of the Polaris Mine, the Storm claims were allowed to lapse in 2007. Commander Resources staked the property in 2008 and flew a helicopter-borne VTEM survey in 2011 but conducted no additional drilling. Aston Bay subsequently entered into an earn-in agreement with Commander and consolidated 100% ownership in 2015. Commander retains a 0.875% Gross Overriding Royalty in the area of the original Storm claims.

In 2016 Aston Bay entered into an earn-in agreement with BHP, who conducted a 2,000-station soil sampling program and drilled 1,951m of core in 12 diamond drill holes, yielding up to 16m* @ 3.1% Cu. BHP exited the agreement in 2017. Aston Bay conducted a property-wide airborne gravity gradiometry survey in 2017 and drilled 2,913m in nine core holes in the Storm area in 2018 yielding a best intercept of 1.5m* @ 4.39% Cu and 20.5m* @ 0.56% Cu.

Agreement with American West Metals

An earn-in agreement for the Storm and Seal properties was signed with American West Metals in March 2021. Under the terms of the agreement, an expenditure of C$10m will earn 80% ownership of the property for American West. Aston Bay is carried for all expenditures to the completion of a feasibility study and production decision. If Aston Bay chooses not to participate and is diluted below 10% ownership, the ownership converts to a 2% Net Smelter Royalty, half of which is purchasable by American West for C$5m at first production. Aston Bay received a cash payment of C$500,000 on signing.

Recent Work

American West completed a fixed loop electromagnetic (FLEM) ground geophysical survey in 2021 that yielded several new subsurface conductive anomalies. A total of 1,534m were drilled in 10 diamond drill holes in the 2022 season, yielding several impressive near-surface intercepts including 41m* @ 4.1% Cu as well as 68m of sulfide mineralization associated with a deeper conductive anomaly.

In April 2022 results of beneficiation studies demonstrated that a mineralized intercept grading 4% Cu from the 4100N area could be upgraded to a 54% Cu direct ship product using standard sorting technology. Further beneficiation studies are ongoing.

In April 2023 American West embarked on a spring delineation drilling program using a helicopter-portable reverse circulation (RC) drill rig as well as gravity and moving loop electromagnetic (MLEM) ground geophysical programs. Results from the programs are in process and are released as they come available.

A summer 2023 program plans further delineation drilling of the near-surface high-grade copper zones to advance them toward maiden resource reports by late 2023. Diamond drilling is planned to test new high-priority gravity targets and environmental baseline studies will be initiated.

*Stated drill hole intersections are all core length, and true width is expected to be 60% to 95% of core length.

Figure 8: Storm Copper Project, Location Map.

QA/QC Protocols

The analytical work reported on herein was performed by ALS Global (‘ALS’), Vancouver Canada. ALS is an ISO-IEC 17025:2017 and ISO 9001:2015 accredited geoanalytical laboratory and is independent of Aston Bay Holdings Ltd., American West Metals Limited, and the QP. Drill core samples were subject to crushing at a minimum of 70% passing 2 mm, followed by pulverizing of a 250-gram split to 85% passing 75 microns. Samples were subject to 33 element geochemistry by four-acid digestion and inductively coupled plasma atomic emission spectroscopy (ICP-AES) to determine concentrations of copper, silver, lead, zinc, and other elements (ALS Method ME-ICP61a). Overlimit values for copper (>10%) and were analyzed via four-acid digestion and ICP-AES (ALS Method Cu-OG62).

Aston Bay Holdings Ltd. and American West Metals Limited followed industry standard procedures for the work carried out on the Storm Project, incorporating a quality assurance/quality control (QA/QC) program. Blank, duplicate, and standard samples were inserted into the sample sequence and sent to the laboratory for analysis. No significant QA/QC issues were detected during review of the data. Aston Bay Holdings Ltd. and American West Metals Limited are not aware of any drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data referred to herein.

Qualified Person

Michael Dufresne, M.Sc., P.Geol., P.Geo., is a qualified person as defined by National Instrument 43-101 and has reviewed and approved the scientific and technical information in this press release.

About Aston Bay Holdings

Aston Bay is a publicly traded mineral exploration company exploring for high-grade copper and gold deposits in Virginia, USA, and Nunavut, Canada. The Company is led by CEO Thomas Ullrich with exploration in Virginia directed by the Company’s advisor, Don Taylor, the 2018 Thayer Lindsley Award winner for his discovery of the Taylor Pb-Zn-Ag Deposit in Arizona. The Company is currently exploring the high-grade Buckingham Gold Vein in central Virginia and is in advanced stages of negotiation on other lands with high-grade copper potential in the area.

The Company is 100% owner of the Storm Project property, which hosts the Storm Copper Project and the Seal Zinc Deposit and has been optioned to American West Metals Limited.

About American West Metals Limited

AMERICAN WEST METALS LIMITED (ASX: AW1) is an Australian clean energy mining company focused on growth through the discovery and development of major base metal mineral deposits in Tier 1 jurisdictions of North America. Our strategy is focused on developing mines that have a low-footprint and support the global energy transformation. Our portfolio of copper and zinc projects in Utah and Canada include significant existing resource inventories and high-grade mineralization that can generate robust mining proposals. Core to our approach is our commitment to the ethical extraction and processing of minerals and making a meaningful contribution to the communities where our projects are located.

Led by a highly experienced leadership team, our strategic initiatives lay the foundation for a sustainable business which aims to deliver high-multiplier returns on shareholder investment and economic benefits to all stakeholders.

For further information on American West, visit: www.americanwestmetals.com.

FORWARD-LOOKING STATEMENTS

Statements made in this news release, including those regarding the Option Agreement, grant of the Option and the expected closing date, American West’s interest in the Storm Project and its other acquisitions and plans, plans for the upcoming field season, management objectives, forecasts, estimates, expectations, or predictions of the future may constitute ‘forward-looking statement’, which can be identified by the use of conditional or future tenses or by the use of such verbs as ‘believe’, ‘expect’, ‘may’, ‘will’, ‘should’, ‘estimate’, ‘anticipate’, ‘project’, ‘plan’, and words of similar import, including variations thereof and negative forms. This press release contains forward-looking statements that reflect, as of the date of this press release, Aston Bay’s expectations, estimates and projections about its operations, the mining industry and the economic environment in which it operates. Statements in this press release that are not supported by historical fact are forward-looking statements, meaning they involve risk, uncertainty and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements. Although Aston Bay believes that the assumptions inherent in the forward-looking statements are reasonable, undue reliance should not be placed on these statements, which apply only at the time of writing of this press release. Aston Bay disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except to the extent required by securities legislation.

For more information contact:

Thomas Ullrich, Chief Executive Officer
thomas.ullrich@astonbayholdings.com
(416) 456-3516

Sofia Harquail, IR and Corporate Development
sofia.harquail@astonbayholdings.com
(647) 821-1337

SOURCE:Aston Bay Holdings Ltd

View source version on accesswire.com:
https://www.accesswire.com/774807/Aston-Bay-and-American-West-Metals-Announce-Fourth-Diamond-Drill-Hole-Hits-Thick-Interval-of-Visual-Copper-Sulfides-at-the-Storm-Copper-Project-Canada

News Provided by ACCESSWIRE via QuoteMedia

This post appeared first on investingnews.com
Enter Your Information Below To Receive Trading Ideas and Latest News






    Your information is secure and your privacy is protected. By opting in you agree to receive emails from us. Remember that you can opt-out any time, we hate spam too!

    You May Also Like

    Business

    The head of a watchdog group that identifies acts of antisemitism says she and her team are stunned by the Jewish hatred being expressed...

    Stock

    SPX Monitoring Purposes: Long SPX 6/21/23 at 4365.69. Long SPX on 2/6/23 at 4110.98: Sold 6/16/23 at 4409.59 = gain of 7.26%. Monitoring Purposes...

    Business

    Fitch downgraded its credit rating for the U.S. government, from AAA to AA+, two months after the debt-ceiling crisis was resolved. “In Fitch’s view,...

    World News

    The 2012 Republican presidential nominating contest was a race unlike any other. For a time it seemed as if virtually everyone got a stint...